Not all floor coating systems are equal. Here's exactly what goes into a Crete Creations installation — and why each layer matters for long-term performance.
When homeowners research garage floor coatings, they often focus on a single product name. The reality is that the complete system — and the preparation underneath it — determines everything about how the floor performs. Use the free quote form to estimate a properly spec'd system for your project.
The first product applied to every Crete Creations floor is a moisture vapor barrier — and most contractors skip this step entirely. Moisture vapor moves through the slab from below, driven by humidity differentials. Over time, this pressure breaks the bond between coating and concrete from below — causing bubbling and delamination. Read the full surface prep guide →
100% solids epoxy contains no solvents or water carriers — every ounce you apply stays in the cured film. Solvent-based products shrink as the carrier evaporates, leaving a thinner, weaker film. 100% solids cures at full applied thickness — creating a harder, denser, more durable base layer with maximum adhesion to the diamond-ground concrete surface.
Decorative vinyl flakes broadcast at 100% coverage — wall to wall, no bare spots. Full broadcast maximizes surface texture for superior grip, creates consistent decorative appearance, and ensures the topcoat bonds to a complete, even layer. Available in 27 full flake color blends — custom blends available at upcharge.
The finishing clear coat is a high-solids polyaspartic — UV stable, chemical resistant, hot-tire proof, and flexible through Missouri's freeze-thaw cycles. This is what separates a floor that lasts 20 years from one that starts peeling in two. Standard epoxy clear coats yellow in sunlight. Our polyaspartic topcoat doesn't.
Ready to estimate your project? Use the free quote form for a fast ballpark — then call Arturo at (417) 483-7082 for a free on-site quote.
Get a Free Quote → Request Free Quote